Nautique SPORT NAUTIQUE 216 User Manual Page 136

  • Download
  • Add to my manuals
  • Print
  • Page
    / 188
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 135
6-13
Stopping
Stopping the engine immediately after operating at high speed is
not recommended. Allow the engine a 2-3 minute cool-down
period at idle or low speed.
Refer to your engine operator and maintenance manual for
stopping information.
Docking
Approach a dock slowly and use caution. Plan your maneuvers
ahead of time. Allow wind and current movement to help
maneuver your boat.
Come to a stop a short distance from the dock, then proceed slowly.
Have your fenders and mooring lines ready.
Observe how the wind and current are moving your boat.
Approach the dock with the boat pointed into the wind, if
possible.
If possible, throw a line to a person on the dock and have
that person secure a bow line. If no one is on the dock,
maneuver as close as you can, then secure any line to a
piling or dock cleat.
Before tying up your boat, be sure to use enough fenders to protect
the boat from damage. If possible, tie up the bow toward the waves
with a good quality double-braided nylon line. Tie up only to the
lifting, tie down eyes or cleats; DO NOT use the handrails or
windshield frame. If the boat is to be moored for a long period of
time, use chafing protectors on the lines to protect the gelcoat
finish. Leave a little slack in the lines to allow for some wave
movement or tidal action is applicable.
When departing, cast off the bow line and move away. If the wind
or current is pushing away from the dock, cast off all lines and allow
to drift until you are clear.
Getting Underway
Sport
Do not use your hands, arms or another
part of your body to attempt to keep the boat from hitting
the dock.The boat could push against the dock, causing
severe injury.
!
DANGER
!
Nautique Sport Sec 6.qxd 11/19/04 4:08 PM Page 6-13
Page view 135
1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 187 188

Comments to this Manuals

No comments